curve-fitting-based method for modeling voltage–current characteristic of an ac electric arc furnace

field measurements of voltage and current are the most effective way for characterizing the electric response of an ac electric arc furnace that describes its nonlinear behavior. sufficient measured information can be adopted to determine the background harmonic level in a power system, to characterize specific sources of harmonics, and to develop an appropriate nonlinear voltage–current characteristic. in this paper, a curve-fitting-based method called cubic spline interpolation is proposed to model the voltage–current characteristic of an ac electric arc furnace in the steady state. meanwhile, the actual measured data are collected for modeling use. two classic methods, harmonic current injections and equivalent harmonic voltage sources, for modeling the electric arc furnace load are reviewed and used to evaluate the performance of proposed model. results obtained from the measured data and computer simulations of the three electric arc furnace models are then compared according to the voltage and current waveforms, as well as the voltage–current characteristic. it is shown that the proposed model is more accurate than the two classic approaches for harmonic assessment of electric arc furnaces and can be used for modeling similar types of nonlinear loads in the harmonic penetration study.