fischer–tropsch catalysts deposited with size-controlled co3o4 nanocrystals: effect of co particle size on catalytic activity and stability

the influences of cobalt particle size on the fischer–tropsch reaction have been studied by using pre-synthesized cobalt oxide nanoparticles. cobalt oxide nanoparticles in the range of 3–16 nm were synthesized by reacting colloidal solution of co₃o₄ at the different reaction temperatures from 150 to 250 °c and stabilized by capping agent. the nanoparticles were impregnated on γ-al₂o₃ to prepare 5 wt% co/al₂o₃catalysts and compared with the catalysts prepared by conventional methods. the reduction degree by tpr and o₂-uptake increased with the increase in the cobalt crystal size from 4.8 to 17.5 nm, however h₂-uptake decreased. the rapid growth in the catalytic activity was observed when the cobalt crystal size increased from 4.8 to 9.3 nm and then the activity decreased with further increase in crystal size showing volcano shape in catalytic activity. the catalyst with the cobalt particle size of 9.3 nm showed higher co conversion, better c₅₊ selectivity and lower methane conversion. these size-defined cobalt catalysts showed considerably higher fts activity and better tof (s⁻¹) than conventional catalysts and with the increase in the cobalt particle size, their deactivation rates also decreased as well even after 54 h on stream.