اینستاگرام تی پی بین
همایش ، رویداد ، ژورنال
حوزه های تحت پوشش رویداد
  • a method of concurrent thermographic–photographic visualization of flow boiling in a minichannel

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 916
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
      a method is developed to capture the distribution of surface temperature while simultaneously imaging the bubble motions in diabatic flow boiling in a horizontal minichannel. liquid crystal thermography is used to obtain highly resolved surface temperature measurements on the uniformly heated upper surface of the channel. high-speed images of the flow field are acquired simultaneously and are overlaid with the thermal images. the local surface temperature and heat transfer coefficient can be analyzed with the knowledge of the nucleation site density and location, and bubble motion and size evolution. the horizontal channel is 1.2 mm high × 23 mm wide × 357 mm long, and the working fluids are novec 649 and r-11. optical access is through a machined glass plate which forms the bottom of the channel. the top surface is an electrically heated 76 μm-thick hastelloy foil held in place by a water-cooled aluminum and glass frame. the heat loss resulting from this construction is computed using a conduction model in fluent. the model is driven by temperature measurements on the foil, glass plate and aluminum frame. this model produces a corrected value for the local surface heat flux and enables the computation of the bulk fluid temperature and heat transfer coefficient along the channel. the streamwise evolution of the heat transfer coefficient for single-phase laminar flow is compared to theoretical values for a uniform-flux boundary condition. examples of the use of the facility for visualizing subcooled two-phase flows are presented. these examples include measurements of the surface temperature distribution around active nucleation sites and the construction of boiling curves for locations along the test surface. points on the curve can be associated with specific image sequences so that the role of mechanisms such as nucleation and the sliding of confined bubbles may be discerned.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم