• characterization of stress–strain response of lead-free solder joints using a digital image correlation technique and finite-element modeling

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 814
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     the stress–strain response of miniaturized sn-ag-cu (sac) lead-free solder joints in the thickness range of 80 μm to about 1.1 mm was studied. a high-resolution three-dimensional (3d) digital image correlation system was used for in situ measurement of displacement and strain fields in the solder joints during tensile testing. these measurements showed that the localization of plastic strain and stress buildup occurs mainly at the interface of the solder. with increasing solder gap thickness the size of the plastically deformed zone in the solder increases, resulting in transformation of a brittle interfacial fracture to a ductile fracture within the bulk of the solder. the experimental deformation plots of solder joints and strain-rate-dependent tensile tests on bulk solder material were used to establish a new constitutive material model for the solder. this strain-rate- and pressure-dependent material model was implemented in abaqus through the user subroutine creep. in agreement with the experiments, the finite-element method simulation revealed a pronounced thickness effect leading to higher tensile strength of thinner solder joints.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین ژورنال ها