• texturing of (bi0.2sb0.8)2te3 nanopowders by open die pressing

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 789
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     open die pressing (odp) at 370°c to 420°c has been employed as a straightforward forming process for sintering and texturing p-type (bi0.2sb0.8)2te3 nanopowders. x-ray diffraction pattern analysis showed that odp samples were strongly textured, with the basal (00l) planes of the hexagonal crystal cell oriented parallel to the pressing plates. the degree of texturing, evaluated as the orientation factor, f, by the lotgering method, increased with decreasing final thickness of the samples. it was about f = 45% for 10-mm-thick samples and reached 70% for 2-mm-thick samples. thermoelectric properties of odp specimens were measured by the harman method in the range from 20°c to 170°c. the dimensionless figure of merit, zt, for 10-mm-thick samples was around 1 from room temperature up to 100°c.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها