• (investigation of the effect of anoxic selector on sludge bulking in sbr system(case study: shiraz wastewater treatment plant in south-western of iran

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/11/15
    • تاریخ انتشار در تی پی بین: 1390/11/15
    • تعداد بازدید: 736
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     one method of biological wastewater treatment is activated sludge. the activated sludge process is the most commonly used technology for biological wastewater treatment. bulking sludge is a complicated and unpredictable challenge for many wastewater treatment plants globally. the sludge will not settle properly and huge amounts of soft foam can float all over the plant. one of the methods to prevent bulking sludge is use of selector before main aeration basin. in this paper the effect of use of anoxic selector in activated sludge process was investigated. experiments were conducted in batch culture with use of sequential batch reactor (sbr) system. three reactors, each with 4 liter volume, and different initial floc loading were used. different anoxic feeding time which shows contact time in the selector were applied in terms of 0,20,30,40 min. parameter sludge volume index (svi) was measured for different initial floc loading and contact time in the selector. results from this study showed that selector with contact time of 40 min and floc loading 0.4 has good effect on sludge stability.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها