• zeolite filled polyimide membranes for dehydration of isopropanol through pervaporation process

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 696
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     six mixed matrix membranes (mmms) were prepared using zeolites of 4a and zsm-5 incorporated in polyimide of matrimid 5218. effects of filler type on membrane morphology and pervaporation performance of mmms were investigated using isopropanol dehydration. in addition, effects of operating temperature (30, 40, 50, and 60 °c), feed water concentration (10, 20, 30, and 40 wt.%) and permeate side pressure (0 and 15 torr) on pervaporation performance were studied. scanning electron microscopy (sem) analysis showed there were good adhesion between the fillers and the polymer matrix. zeolite 4a has a better contact with the polymer phase and thereby nearly no void is formed in the mmm structure. pervaporation were performed based on l16 array of taguchi method for design of experiments. the results showed that the best separation condition is achieved at temperature, feed water concentration, and permeate pressure of 30 °c, 10 wt.% water and 0 torr, respectively. selectivities of zeolites 4a and zsm-5 filled mmms were calculated as 8991 and 3904 compared with 1276 measured for the neat matrimid 5218 membrane. permeation rates of the zeolite 4a and zsm-5 filled mmms and the neat polymeric membrane were found to be 0.018, 0.016, and 0.013 kg/m2 h, respectively.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها