• a thermo-mechanical treatment to improve the superelastic performances of biomedical ti–26nb and ti–20nb–6zr (at.%) alloys

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1394/01/01
    • تاریخ انتشار در تی پی بین: 1394/01/01
    • تعداد بازدید: 698
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     a flash-thermal treatment technique has been developed very recently to improve both the critical stress to induce the martensitic transformation (mt) and the recoverable deformation of the metastable β type titanium alloys. in this paper, this strategy is applied to both ti–26nb and ti–20nb–6zr (at.%) alloys. since both alloys have identical martensite start (ms) temperature, it makes possible to investigate the effect of zr on mechanical properties after the flash-thermal treatment. it is clearly shown that a flash treatment of 360 s at 873 k on heavily cold-rolled samples results in good balance between the tensile strength, the ductility and the recoverable strains. such contribution is more significant in the ternary alloy in which balanced properties combining high martensitic critical stress over 400 mpa and the large fully recoverable strains up to 3.0% can be achieved. these improvements are due to the flash treatment effects, resulting in ultra-fine β grains with sizes 1–2 μm with nano-sized α and ω phases precipitation in the β matrix.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین ژورنال ها