• trapping and escape of dislocations in micro-crystals with external and internal barriers

    کلمات کلیدی :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 737
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     we perform three-dimensional dislocation dynamics simulations of solid and annular pillars, having both free-surface boundary conditions, or strong barriers at the outer and/or inner surfaces. both pillar geometries are observed to exhibit a size effect where smaller pillars are stronger. the scaling observed is consistent with the weakest-link activation mechanism and depends on the solid pillar diameter, or the annular pillar effective diameter, deff = d − di, where d and di are the external and internal diameters of the pillar, respectively. an external strong barrier is observed to dramatically increase the dislocation density by an order of magnitude due to trapping dislocations at the surface. in addition, a considerable increase in the flow strength, by up to 60%, is observed compared to simulations having free-surface boundary conditions. as the applied load increases, weak spots form on the surface of the pillar by dislocations breaking through the surface when the rss is greater than the barrier strength. the hardening rate is also observed to increase with increasing barrier strength. with cross-slip, we observe dislocations moving to other glide planes, and sometimes double-cross-slipping, producing a thickening of the slip traces at the surface. finally the results are in qualitative agreement with recent compression experimental results of coated and centrally-filled micropillars.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها