• an experimental study of cyclic deformation of extruded az61a magnesium alloy

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 667
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     thin-walled tubular specimens were employed to study the cyclic deformation of extruded az61a magnesium alloy. experiments were conducted under fully reversed strain-controlled tension–compression, torsion, and combined axial–torsion in ambient air. mechanical twinning was found to significantly influence the inelastic deformation of the material. cyclic hardening was observed at all the strain amplitudes under investigation. for tension–compression at strain amplitudes higher than 0.5%, the stress–strain hysteresis loop was asymmetric with a positive mean stress. this was associated with mechanical twinning in the compression phase and detwinning in the subsequent tension phase. under cyclic torsion, the stress–strain hysteresis loops were symmetric although mechanical twinning was observed at high shear strain amplitudes. when the material was subjected to combined axial–torsion loading, the alternative occurrence of twinning and detwinning processes under axial stress resulted in asymmetric shear stress–shear strain hysteresis loops. nonproportional hardening was not observed due to limited number of slip systems and the formation of mechanical twins. microstructures after the stabilization of cyclic deformation were observed and the dominant mechanisms governing cyclic deformation were discussed. existing cyclic plasticity models were discussed in light of their capabilities for modeling the observed cyclic deformation of the magnesium alloy.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها