• radial and vertical velocity modeling under deflector in vortex chamber

    نویسندگان :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1391/11/03
    • تاریخ انتشار در تی پی بین: 1391/11/03
    • تعداد بازدید: 693
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     vortex chambers utilize vortex flow within the chamber in order to separate sediment particles from the flow. the structure of flow inside the vortex chamber is complicated and fully three-dimensional. in this paper, a comprehensive research was conducted in a physical model with circular deflect installed in the whole periphery of a vortex chamber. the three-dimensional flow velocity was measured using a micro-adv, to understand the flow structure and also to distinguish secondary currents above and below the circular deflector. the velocity of flow was measured at 448 different nodal points and at eight different horizontal layers within the flow depth. the measurements were taken at radial sections of 0, 45, 90, 135, 180, 225, 270 and 315 degrees from theinlet.the secondary currents below the deflector increase, these secondary currents approach towards the central orifice. secondary currents below the deflector are useful to impinge deposited sediment particles towards the flushing orifice.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها