• studying the effect of length and material properties of knee element on behavior factor of knee bracing system using nonlinear static analysis

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1393/11/01
    • تاریخ انتشار در تی پی بین: 1393/11/01
    • تعداد بازدید: 765
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     in a knee brace system, at least one end of the diagonal member is connected to a small knee element instead of being connected to the beam-column intersection. the ductility in a knee bracing frame (kbf) is due to the knee element yielding in shear. on the other hand, the required lateral stiffness in such frames is provided by a diagonal member. yielding of the knee element during a strong earthquake would ensure overall system stability without damaging the main structural components. thus, reconstruction of the earthquake-resistant system would be easier and more economic. considering the increased ductility and energy damping requirements set forth for building structures in seismic zones, the authors studied in the paper the effects of the length and properties of the materials used in knee bracing systems. to obtain reliable modeling and analysis results, first a suitable sample was selected from among the credible test models used in world renowned research centers and, subsequently, this sample was modeled by ansys software. then, modeling accuracy was established by comparing corresponding load-deformation curves. finally, by varying the knee member length and material properties, numerous models were generated in the ansys environment. ultimately, such characteristics as ductility, behavior coefficient, ultimate strength, energy absorption, etc. were calculated and the relevant tables and curves produced.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها