• numerical modeling of guided wave interaction with non-axisymmetric cracks in elastic cylinders

    کلمات کلیدی :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/01/01
    • تاریخ انتشار در تی پی بین: 1392/01/01
    • تعداد بازدید: 561
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     a three dimensional (3d) hybrid method combining the classical finite element (fe) method with the semi-analytical finite element (safe) technique is developed. this hybrid method is employed to study the interaction of guided waves with non-axisymmetric damages in cylinders. the near field surrounding the damage is analysed with the 3d fe method. the solution is expanded into sums of guided modes on both inlet and outlet cross-sections. such eigenmode expansions enable separation into ingoing and outgoing waves, i.e., incident, reflected and transmitted waves. using the safe method, elastic guided modes are then computed at the aforementioned cross-sections thus reducing the analysis to two dimensions (2d). the amplitudes of the incident modes are imposed, whereas those of the scattered modes are determined by solving the global system of the 3d hybrid fe-safe model. in this paper, a formula is proposed for the calculation of eigenforces and modal power flows from eigendisplacements and safe matrices. this has the advantage of simplifying the post-process of load eigenvectors in hybrid fe-safe methods. results obtained for a vertical free-end cylinder are in good agreement with those published in the literature. moreover, first results of the interaction of the fundamental compressional, flexural and torsional pochhammer–chree modes with non-axisymmetric vertical cracks are obtained and discussed. then, the interactions of the fundamental compressional mode with oblique free-ends and cracks are briefly addressed. the power balance is shown to be satisfied with a good accuracy.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها