-
buckling of delaminated bi-layer beam-columns
جزئیات بیشتر مقاله- تاریخ ارائه: 1392/01/01
- تاریخ انتشار در تی پی بین: 1392/01/01
- تعداد بازدید: 751
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
an improved analytical model is presented to analyze the delamination buckling of a bi-layer beam-column with a through-the-width delamination. both the transverse shear deformation and local delamination tip deformations are taken into consideration, and two delaminated sub-layers as well as two substrates in the intact (un-delaminated) regions are modeled as individual timoshenko beams. a deformable interface is introduced to establish the continuity condition between the two substrates in the intact regions. consequently, a flexible joint is formed at the delamination tip, and it is different from the conventional rigid joint given in most of studies in the literature, in which the local delamination tip deformations are completely ignored. in contrast to the local delamination buckling in our previous study (qiao et al., 2010), the present model accounts for the global deformations of the intact region in the delaminated composite beam-column, thus capable of capturing the buckling mode shape transitions from the global, to global–local coexistent, and to local buckling for asymmetric delamination as the interface delamination increases. good agreement of the present analytical solutions with the full 2-d elastic finite element analysis demonstrates the local deformation effects around the delamination tip and verifies the accuracy of the present model. parametric studies are conducted to investigate the effects of loading eccentricity, delaminated sub-layer thickness ratio, and interface compliance on the critical buckling load for the delaminated composite beam-column. transitions of buckling modes from the global to local delamination buckling are also disclosed as the thickness of one sub-layer reduces from the thick sub-layer to a thin film. the developed delamination buckling solution facilitates the design analysis and optimization of laminated composite structures, and it can be used with confidence in buckling analysis of delaminated composite structures.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
ایفای نقش it در آموزش ریاضی
-
مکانیابی بهینه ایستگاه های آتش نشانی با استفاده از مدل ahp با رویکرد پدافند غیرعامل ؛نمونه موردی، شهر بهبهان
-
بررسی عددی جانمایی ماده منفجره با توجه به شبکه آرماتور بر میزان تخریب در دال بتن مسلح
-
بررسی تأثیر اکسیژن درمانی تکمیلی بر میزان بروز و شدت تهوع و استفراغ بعد از عمل جراحی سزارین به روش بی حسی نخاعی
-
ارزیابی روش های مختلف فیزیکی شیمیایی نمک زدایی و انتخاب گزینه برتر جهت بهبود کیفیت آب های زیرزمینی (مطالعه موردی: آب چاه های بهارستانی تربت حیدریه)
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
ارزیابی نقش مدیران شهری در مدیریت بحران
-
ارتباط منظر و نمای شهـری با مؤلفه های ژئوپلیتیک و قدرت سیاسی شهری
-
تحلیلی بر علل و عوامل کاهش انگیزه و تأثیر آن بر افت تحصیلی دانش آموزان
-
رابطه بین تیپ های شخصیتی با شادکامی و عزت نفس در بین دانشجویان دانشگاه امام جواد(ع) شهر یزد
-
the impact of mck+ prangkuti luhur towards the improvement of community life quality in bustaman village
سوال خود را در مورد این مقاله مطرح نمایید :