• phase composition and in vitro bioactivity of porous implants made of bioactive glass s53p4

    کلمات کلیدی :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/01/01
    • تاریخ انتشار در تی پی بین: 1392/01/01
    • تعداد بازدید: 884
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     this work studied the influence of sintering temperature on the phase composition, compression strength and in vitro properties of implants made of bioactive glass s53p4. the implants were sintered within the temperature range 600–1000 °c. over the whole temperature range studied, consolidation took place mainly via viscous flow sintering, even though there was partial surface crystallization. the mechanical strength of the implants was low but increased with the sintering temperature, from 0.7 mpa at 635 °c to 10 mpa at 1000 °c. changes in the composition of simulated body fluid (sbf), the immersion solution, were evaluated by ph measurements and ion analysis using inductively coupled plasma optical emission spectrometry. the development of a calcium phosphate layer on the implant surfaces was verified using scanning electron microscopy–electron-dispersive x-ray analysis. when immersed in sbf, a calcium phosphate layer formed on all the samples, but the structure of this layer was affected by the surface crystalline phases. hydroxyapatite formed more readily on amorphous and partially crystalline implants containing both primary na2o·cao·2sio2 and secondary na2ca4(po4)2sio4 crystals than on implants containing only primary crystals.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها