• incorporation of selectivity factor in modeling binary component adsorption isotherms for heavy metals-biomass system

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/01/01
    • تاریخ انتشار در تی پی بین: 1392/01/01
    • تعداد بازدید: 497
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     the single and binary biosorption of copper and lead ions from aqueous solution using a low cost agro-based resource (i.e. rice straw) has been demonstrated in this work. the biosorption experiments were performed in a static mode. experimental parameters affecting the sorption process namely biosorbent dose, ph, and temperature were studied. two empirical adsorption models (i.e. langmuir and freundlich) were used for the evaluation of biosorption equilibrium data in single system. both models were able to correlate experimental data satisfactorily. the adsorptivity of solute (kl) and maximum sorption capacity of the solid (qm) were increased at higher temperatures. for binary metal system, we modified the adsorption parameters of extended-langmuir model (i.e.kl-bin and qm-bin) by introducing selectivity factor of the solute (s). it was found that the modified extended-langmuir model with incorporation of solute’s selectivity factor gave good correlation results against binary adsorption data with reasonable fitted parameter values. the feasibility and biosorption performance of rice straw in sequestering copper and lead ions was also tested using real effluent along with its regeneration possibility.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها