• optimal damper placement based on base moment in steel building frames

    نویسندگان :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1394/01/01
    • تاریخ انتشار در تی پی بین: 1394/01/01
    • تعداد بازدید: 601
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     a new damper optimization method for finding optimal size and location of the added viscous dampers is proposed based on the elastic base moment in planar steel building frames. a fourier transform is applied to the equation of the motion and the transfer function in terms of the fundamental natural frequency of the structures is defined. the transfer function amplitude of the elastic base moment evaluated at the first natural circular frequency of the structure is chosen as a new objective function in the minimization problem. the damper coefficients of the added viscous dampers are taken into consideration as design variables in a steel planar building frame. the transfer function amplitude of the elastic base moment is minimized under an active constraint on the sum of the damper coefficients of the added dampers and the passive constraints on the upper and lower bounds of the added dampers. the optimal damper design presented in this paper is compared with other optimal damper methods based on top displacement, top absolute acceleration and base shear. a ten-storey steel planar building frame is chosen to be rehabilitated with the optimal dampers. the optimal damper allocation is obtained for the transfer function amplitude of the elastic base moment then compared with the other damper optimization methods in terms of the transfer function response. the results of the proposed method show that the method can also be beneficial to decrease both the base moment and the interstorey drift ratios in some frequency regions.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها