-
effect of some manufacturing variables on formaldehyde release from particleboard: relationship between different test methods
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/01/01
- تاریخ انتشار در تی پی بین: 1390/01/01
- تعداد بازدید: 456
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
different standard methods were used to determine the formaldehyde emission (fe) from particleboard; some of them were defined as european, japanese and american standards. this study aimed to determine the effect of some manufacturing variables on fe of particleboards produced using melamine–urea–formaldehyde (muf) adhesive with low content of free formaldehyde. the fe from the two types of particleboard (uncoated and laminated of 16–19 mm thickness) was measured with gas analysis method (en 717-2) as well as the formaldehyde content (fc) with perforator method (en 120). the european chamber (en 717-1), japanese desiccator method (jis a 1460) and american large chamber (astm e 1333-96) values were measured by the conversion factor. the two types of particleboard studies showed differences in their formaldehyde parameters. it was concluded that the amount of formaldehyde emitted from the most of the manufactured boards resulted in the emission class el. in addition, laminating and decreasing the board thickness had a highly significant effect (p < 0.001) on decreasing the formaldehyde parameters. the particleboard e1-emission class had approximately the same value according to the test methods and similar behavior was observed in the relationship between the en 120 values and en 717-1, jis a 1460, the proposed california air resource board (carb) phase 1 and 2. this article considers how to estimate the fe values of the international test methods using the conversion factor to eliminate the need for time consuming and expensive equipment.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی تأثیر تجویز همزمان ویتامین c و وارفارین بر مسیرهای انعقادی خون موش صحرایی
-
تاثیر الیاف نایلون بر مقاومت فشاری و مدول الاستیسیته بتن خودتراکم و بررسی رابطه آنها
-
ارتباط سن با افزایش فشار نبض در اندام های فوقانی و تحتانی
-
بررسی عملکرد لرزه ای اتصالات تیر- ستون بتنی تقویت شده با ورق های فولادی
-
نقش سازمان آتش نشانی در مدیریت بحران ناشی از مخاطرات طبیعی سیل و آبگرفتگی (مورد مطالعه: خط شماره 4 متروی تهران)
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
تلاش برای حفظ جایگاه هویت معماری همراه با توسعه شهرنشینی در معماری معاصر با تاکید بر آسمان خراش هامونگ چین
-
شناسایی و رتبه بندی موانع به کارگیری سیستم بهایابی بر td-abc در صنایع سنگ استان فارس
-
بهینه سازی فرآیند استخراج عصاره اتانولی برگ بادام به روش سطح پاسخ و بررسی اثر آنتی اکسیدانی آن
-
anions bioremediation potential of immobilized bacteria in tannery industrial effluents from kano state, nigeria
-
a computational estimation for alkyl chain effect in schiff base pyridinium fluoride ionic liquid on chemical reactivity, thermophysical properties, pharmacokinetics, and biological activity by dft approach
سوال خود را در مورد این مقاله مطرح نمایید :