• influence of filling water on air concentration

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 379
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     the filling water inside the cavity below an aerator occurs for the flow of low froude number or the small bottom slope of a spillway. the aerator may cease to protect against cavitation damages, and may even act as a generator of cavitation if it is fully filled by water. the experiments were conducted to investigate the influences of the geometric parameters, and then the filling water on the air concentration. the results show that the filling water, or the net cavity length, is closely related to the plunging jet length for a given aerator, and the air concentration at some section is proportional to the ratio ln/lj at a fixed lj for different geometric parameters of aerators. secondly, at the same ratio ofln/lj, the aerator with a larger height or a larger angle of ramp, or a larger bottom slope, would have a larger plunging jet length, and then a larger net cavity length based on the ratio of ln/lj. as a result, the large space of cavity, or the high air concentration of the flow could be obtained although the filling water increases also based on the fact that lf = lj ln. it is the space of the cavity that is the dominant factor to affect the air concentration of the flow.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها