• fatigue crack growth resistance of gas tungsten arc, electron beam and friction stir welded joints of aa2219 aluminium alloy

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 533
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     aa2219 aluminium alloy square butt joints without filler metal addition were fabricated using gas tungsten arc welding (gtaw), electron beam welding (ebw) and friction stir welding (fsw) processes. the effect of three welding processes on fatigue crack growth behaviour is reported in this paper. transverse tensile properties of the welded joints were evaluated. microstructure analysis was also carried out using optical and electron microscopes. it was found that the fsw joints are exhibiting superior fatigue crack growth resistance compared to ebw and gtaw joints. this was mainly due to the formation of very fine, dynamically recrystallised grains and uniform distribution of fine precipitates in the weld region.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم