• an experimental investigation of the bolt clamping force and friction effect on the fatigue behavior of aluminum alloy 2024-t3 double shear lap joint

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 401
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     in this article, the effect of bolt clamping force on the fatigue life of bolted double shear lap joints was investigated. to do so, fatigue tests were carried out on the bolt clamped double shear lap joint specimens made of aluminum alloy 2024-t3. these fatigue tests were conducted with applied torques of 0.25, 2 and 4 n m at different cyclic longitudinal load levels in un-lubricated and lubricated states. from these tests the stress–life (sn) data for different clamping forces for un-lubricated and lubricated states were obtained. the results show that clamping force increases fatigue life compared to clearance fit specimens. in general, at higher tightening torque higher fatigue lives were achieved, however, below a certain load level the life improvement was discontinued because of fretting phenomenon. also lubricating the parts of the specimens reduces the advantage of clamping force or torque tightening.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین ژورنال ها