• effect of sic whisker addition on the microstructures and mechanical properties of ti(c, n)-based cermets

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 559
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
    ti(c, n)-based cermets with addition of sic whisker (sicw) were prepared by vacuum sintering. the microstructures of the prepared cermets were investigated by using x-ray diffractometry (xrd) and scanning electron microscopy (sem). mechanical properties such as transverse rupture strength (trs), fracture toughness (kic) and hardness (hra) were also measured. it was found that the grain size of the cermets was affected by the sic whisker addition. the cermets with 1.0 wt.% sic whisker addition exhibited the smallest grain size. the porosities of the cermets increased with increasing sic whisker additions. the addition of the sic whisker had no influence on the phase constituents of the cermets. compared with the cermets with no whisker addition, the highest trs and fracture toughness for cermets with 1.0 wt.% sic whisker addition increased by about 24% and 29%, respectively. the strengthening mechanisms were attributed to finer grain size, homogeneous microstructure and moderate thickness of rim phase. the toughening mechanisms were characterized by crack deflection, whisker bridging and whisker pulling-out.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها