• strength and elastic properties of structural lightweight concretes

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 410
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     the study presents the influence of characteristics of four aggregate types (two sintered lightweight fly ash aggregates, cold-bonded lightweight fly ash aggregate and normalweight crushed limestone aggregate) on the strength and elastic properties of concrete mixtures. different models were also used in order to predict the strength and modulus of elasticity values of concretes. the results of this study revealed the achievement of manufacturing high-strength air-entrained lightweight aggregate concretes using sintered and cold-bonded fly ash aggregates. in order to reach target slump and air content, less amount of chemical admixtures was used in lightweight concretes than in normal-weight concrete, leading to reduction in production cost. the use of lightweight aggregates (lwa) instead of normalweight aggregates in concrete production slightly decreased the strength. the models given by codes, standards and software and equation derived in this study gave close estimated values to the experimental results.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها