shear strength of geosynthetic composite systems for design of landfill liner and cover slopes

torsional ring shear tests were performed on composite specimens that simulate the field alignment of municipal solid waste (msw) landfill liner and cover system components. simultaneous shearing was provided to each test specimen without forcing failure to occur through a pre-determined plane. composite liner specimens consisted of a textured geomembrane (gm) underlain by a needle-punched geosynthetic clay liner (gcl) which in turn underlain by a compacted silty clay. hydrated specimens were sheared at eleven different normal stress levels. test results revealed that shear strength of the composite liner system can be controlled by different failure modes depending on the magnitude of normal stress and the comparative values of the gcl interface and internal shear strength. failure following these modes may result in a bilinear or trilinear peak strength envelope and a corresponding stepped residual strength envelope. composite cover specimens that comprised textured gm placed on unreinforced smooth gm-backed gcl resting on compacted sand were sheared at five different gcl hydration conditions and a normal stress that is usually imposed on msw landfill cover geosynthetic components. test results showed that increasing the gcl hydration moves the shearing plane from the gcl smooth gm backing/sand interface to that of the textured gm/hydrated bentonite. effects of these interactive shear strength behaviors of composite liner and cover system components on the possibility of developing progressive failure in landfill slopes were discussed. recommendations for designing landfill geosynthetic-lined slopes were subsequently given. three-dimensional stability analysis of well-documented case history of failed composite system slope was presented to support the introduced results and recommendations.