• comparison of frf measurements and mode shapes determined using optically image based, laser, and accelerometer measurements

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 406
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -

    today, accelerometers and laser doppler vibrometers are widely accepted as valid measurement tools for structural dynamic measurements. however, limitations of these transducers prevent the accurate measurement of some phenomena. for example, accelerometers typically measure motion at a limited number of discrete points and can mass load a structure. scanning laser vibrometers have a very wide frequency range and can measure many points without mass-loading, but are sensitive to large displacements and can have lengthy acquisition times due to sequential measurements. image-based stereo-photogrammetry techniques provide additional measurement capabilities that compliment the current array of measurement systems by providing an alternative that favors high-displacement and low-frequency vibrations typically difficult to measure with accelerometers and laser vibrometers. within this paper, digital image correlation, three-dimensional (3d) point-tracking, 3d laser vibrometry, and accelerometer measurements are all used to measure the dynamics of a structure to compare each of the techniques. each approach has its benefits and drawbacks, so comparative measurements are made using these approaches to show some of the strengths and weaknesses of each technique. additionally, the displacements determined using 3d point-tracking are used to calculate frequency response functions, from which mode shapes are extracted. the image-based frequency response functions (frfs) are compared to those obtained by collocated accelerometers. extracted mode shapes are then compared to those of a previously validated finite element model (fem) of the test structure and are shown to have excellent agreement between the fem and the conventional measurement approaches when compared using the modal assurance criterion (mac) and pseudo-orthogonality check (poc).

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها