the possibility of evaluating turbo-set bearing misalignment defects on the basis of bearing trajectory features

this paper presents the results of computer simulation of bearing misalignment defects in a power turbogenerator. this malfunction is typical for great multi-rotor and multi-bearing rotating machines and very common in power turbo-sets. necessary calculations were carried out by the computer code system meswir, developed and used at the iffm in gdansk for calculating dynamics of rotors supported on oil bearings. the results are presented in the form of a set of journal and bush trajectories of all turbo-set bearings. our analysis focuses on the vibrational effects of displacing the two most vulnerable machine bearings in horizontal and vertical directions by the maximum acceptable range calculated with regard to bearing vibration criterion. this assumption required preliminary assessment of the maximum values for the permissible bearing dislocations. we show the relations between the attributes of the particular bearing trajectories and the bearing displacements in relation to their base design position. the shape and dimensions of bearing trajectories are interpreted based on the theory of hydrodynamic lubrication of oil bearings. it was shown that the relative journal trajectories and absolute bush trajectories carry much important information about the dynamic state of the machine, indicating also the way in which bearings are loaded. therefore, trajectories can be a source of information about the position and direction of bearing misalignments. this article indicates the potential of using trajectory patterns for diagnosing misalignment defects in rotating machines and suggests including sets of trajectory patterns to the knowledge base of a machine diagnostic system.