-
an emg-based model to estimate lumbar muscle forces and spinal loads during complex, high-effort tasks: development and application to residential construction using prefabricated walls
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/02/13
- تاریخ انتشار در تی پی بین: 1390/02/13
- تعداد بازدید: 398
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
residential building construction is moving toward more industrialized construction methods (e.g., use of prefabricated wall or “panels”), yet remains one of highest risk sectors for work-related musculoskeletal disorders. the centralized design process inherent in the use of wall panels offers the potential for proactive control of musculoskeletal risks, consistent with the prevention-through-design (or ptd) philosophy. as part of an ongoing effort to incorporate ergonomics into panel design, estimates of low back loading and injury risk were needed over a range of tasks performed during panelized construction. here, a free-dynamic, three-dimensional, electromyography-based model was developed to provide such estimates, which was a modification of an earlier, relatively coarser model. specific modifications included a more detailed representation of lumbar muscle anatomy and contraction dynamics, high-pass filtering of electromyograms to better represent muscle activation levels, and an enhanced calibration procedure through which five model parameters are specified on an individual basis and used to estimate lumbar muscle forces. with these enhancements, the predictive ability of the model was assessed over a wide range of simulated panel erection tasks. predicted model parameters corresponded well with values reported earlier. reasonable levels of correspondence were found between measured and predicted lumbosacral moments, though predictive ability varied between tasks and rotation planes. relevance to industry wall panels are representative of the current trend toward increasing use of industrialized methods in residential construction. model-based estimates can be used as part of a larger project to facilitate proactive design of residential construction using panelized walls in order to reduce musculoskeletal exposures and spine injury risks.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
مطالعه عددی اثرگذاری ژئوممبران بر میزان نشت در کانال های انتقال آب
-
بررسی رفتار شیارشدگی مسیر چرخ ها در روسازی های آسفالتی حاوی خرده لاستیک ضایعاتی کف پوش وسایط نقلیه
-
بررسی عوامل موثر بر ضریب بار دینامیکی مجاز در پل ها و مقایسه کمی نتایج با رابطه ساده شده aashto
-
رابطه ی مواجهه ی مادران باردار با دود سیگار محیطی و وزن و قد نوزادان آن ها
-
analysis of geosynthetic tubes filled with several liquids with different densities
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
نگاهی به انواع و اقسام آسیب های ورزشی بدنی ورزشکاران در حین ورزش
-
تدوین استراتژی توسعه سرمایه انسانی مطالعه موردی دانشکده علوم پزشکی شهرستان بهبهان
-
بررسی شاخص های توسعه در سکونت گاه های روستایی و شهری ایران
-
تأثیر ارتباط ارزشی اطلاعات سود بر رابطه ریسک اطلاعات با هزینه حقوق مالکانه
-
مسئولیت متعهد در مقابل شخص ثالث
سوال خود را در مورد این مقاله مطرح نمایید :