-
creep fracture mechanics parameters for internal axial surface cracks in pressurized cylinders and creep crack growth analysis
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/01/01
- تاریخ انتشار در تی پی بین: 1390/01/01
- تعداد بازدید: 781
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
in the present study, a low alloy cr–mo steel cylinder subjected to internal pressure at high temperature with a semi-elliptical crack located at the inner surface is considered. the creep crack driving force parameter c∗-integrals calculated by finite element (fe) method, are compared with results from previous studies, which indicates that empirical equations may be inaccurate under some conditions. a total of 96 cases for wide practical ranges of geometry and material parameters are performed to obtain systematic fe results of c∗-integral, which are tabulated and formulated in this paper. it is observed that the maximum c∗-integral may occur neither at the deepest point nor at the surface point when the aspect ratio is large enough and the value of c∗-integral is significantly sensitive to the crack depth ratio. furthermore, based on the proposed equations for estimating c∗-integrals and a step-by-step analysis procedure, crack profile development, crack depth, crack length and remaining life prediction are obtained for surface cracks with various initial aspect ratios. it is found that when the crack depth ratio is increased, there is no obvious convergence of crack aspect ratio observed. the magnitude of half crack length increment is always minor compared with the crack depth increment. in addition, the remaining life is much more dependent on the surface crack depth than on the surface crack length.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
مقایسه پژوهش در زمینه بهینه سازی مصرف انرژی در ایران و ژاپن
-
بررسی و اولویت بندی هوش اخلاقی
-
نقش محوری طلا در هنر تشعیرسازی
-
بررسی الگوریتم های زمانبندی در وایمکس
-
numerical simulation of uniform flow region over a steeply sloping stepped spillway
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
بررسی درک مصرف کننده از فعالیت های بازاریابی رسانه های اجتماعی بر ارزش گذاری برند، پاسخ مشتری و قصد خرید
-
بررسی تأثیر استراتژی مدیریت تنوع محصول بر عملکرد زنجیره تأمین در صنعت خودروسازی
-
عوامل طغیان و کنترل شهوت جنسی با نگاه قرآنی - حدیثی
-
تحلیل جایگاه صنعت گردشگری در توسعه استان ایلام و تدوین استراتژی توسعه بر پایه بخش گردشگری
-
green envelop impact on reducing air temperature and enhancing outdoor thermal comfort in arid climates
سوال خود را در مورد این مقاله مطرح نمایید :