محبوبترین نویسندگان :
نویسندگان مقالات پربازدید :
فناوری منابع زیستی
جزئیات رویداد
همایش ، رویداد ، ژورنال
اینستاگرام تی پی بین
حوزه های تحت پوشش رویداد

  • synthesis and properties of polyurethane foams prepared from heavy oil modified by polyols with 4,4′-methylene-diphenylene isocyanate (mdi)

    نویسندگان :
    کلمات کلیدی :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 543
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     the aim of the present study was to determine whether polyurethane (pu) foams can be prepared from heavy oil derived from biomass liquefaction. since the hydroxyl number of the heavy oil was only 212 mg koh/g, it was modified by polyols, and a hydroxyl number of 564.5 mg koh/g was obtained. however, secondary hydroxyls rather than primary hydroxyls were introduced. as a result, when 10 wt.% activated heavy oil was added to bio-polyols, compressive strength of foams increased by 32% over that without the addition of heavy oil. when activated heavy oil wholly replaced polyethylene glycol 400, the high content of secondary hydroxyls depressed the foam reaction and resulted in partial dissociation of the heavy oil from the network structure and weakening of the thermal stability of the pu foams. therefore, increasing the content of primary-hydroxyls by directional modification is necessary to make the process commercially feasible.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها