-
thermal balance between viscous heating and inlet thermal condition in non stationary polymer flow through a cylindrical die
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/01/01
- تاریخ انتشار در تی پی بین: 1390/01/01
- تعداد بازدید: 605
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
during the forming of polymer materials under extrusion or injection moulding process conditions, the heat source resulting from the high viscous dissipation within the flow in the die channel plays an important role on the thermal field within the polymer and the experimental device. one difficulty to simulate numerically this kind of flow, besides the accurate knowledge of the actual rheological parameters of the materials, consists in fixing the boundary conditions of the spatial domain of integration. indeed, for non stationary conditions, they are varying both in space and time. in this paper, experimental data (temperature and flow rate) measured in a specific instrumented die are compared to the solutions predicted by a set of coupled equations which models the heat source release, the heat conduction process and the polymer flow, under non stationary conditions. this analysis leads to evaluate the thermal balance between the viscous heating and the inlet thermal condition.
حوزه های تحت پوشش رویداد
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی پتروگرافی و پتروفابریک میکاشیست های کمپلکس ژان واقع در نوار سنندج – سیرجان
-
سنجش پایداری اجتماعی در محلات شهری (مطالعه موردی: محله های مرداویچ و مفت آباد شهر اصفهان)
-
membrane gas separations and post-combustion carbon dioxide capture: parametric sensitivity and process integration strategies
-
effect of joint opening on p-wave velocity measurement in andesite rock samples
-
studies on stability and coking resistance of ni/batio3–al2o3 catalysts for lower temperature dry reforming of methane (ltdrm)
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
سنجش کیفیت و ظرفیت گردشگری با تأکید بر الگوهای رفتاری گردشگران در مشهد
-
رفتارشناسی پیامبر اکرم (ص) در تعاملات اجتماعی با یهودیان مدینه
-
مطالعه تطبیقی نظریه تقلید در باب هنر از دیدگاه فلسفه غرب و فلاسفه ایرانی اسلامی
-
experimental assessment of porous material anisotropy and its effect on gas permeability
-
incorporating of two waste materials for the use in fine-grained soil stabilization
سوال خود را در مورد این مقاله مطرح نمایید :