• mechanical behaviour and thermal conductivity of mortars containing waste rubber particles

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 465
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     in the present paper an investigation of mechanical behaviour and thermal conductivity of a lightened building material containing either styrene butadiene rubber (sbr) or polyurethane (pu) waste particles or scraps coming from wasted rubber-shoe outsoles (sr, acronym of ‘sole rubber’) is presented. several mortar mixtures were prepared by replacing quartz sand with 0%, 10%, and 30% of either sbr or pu or sr waste particles. the influence of rubber particle addition on fresh mortar behaviour, compressive and flexural strength of mortar as well as on mortar thermal conductivity was detected. an optimization of mortar mixture proportions was carried out by adding a limestone powder as filler. the experimental investigation showed that the addition of rubber particles reduces both the material unit weight and the thermal conductivity. the thermal insulating effect of rubber particles indicates a high and promising potential for future developments. on the other hand, the addition of limestone powder produced higher thermal conductivity as well as higher compressive and flexural strength.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها