-
aluminium foams as a filler for leading edges: improvements in the mechanical behaviour under bird strike impact tests
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/01/01
- تاریخ انتشار در تی پی بین: 1390/01/01
- تعداد بازدید: 618
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
the use of aluminium foams as filler materials in aeronautical leading edges is investigated. particularly, the improvement of the mechanical behaviour of the filled structure respect to the hollow one is analysed by means of standard bird strike impact tests. for this purpose, a collection of alsi10 foams were fabricated using the powder metallurgical route (pm), and introduced into leading edges profiles, maintaining or reducing the total weight of the composite structure (leading edge + aluminium foam) in comparison with the original one (hollow structure). bird strike impact tests were carried out in both types of structures, comparing the global deformation and total load transferred in the tests. the results showed that the composite structure, a 13% lighter than the original one, showed four times better behaviour in terms of global deformation and an improvement of two times in the transmitted load.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی پتروگرافی و پتروفابریک میکاشیست های کمپلکس ژان واقع در نوار سنندج – سیرجان
-
سنجش پایداری اجتماعی در محلات شهری (مطالعه موردی: محله های مرداویچ و مفت آباد شهر اصفهان)
-
membrane gas separations and post-combustion carbon dioxide capture: parametric sensitivity and process integration strategies
-
effect of joint opening on p-wave velocity measurement in andesite rock samples
-
studies on stability and coking resistance of ni/batio3–al2o3 catalysts for lower temperature dry reforming of methane (ltdrm)
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
سنجش کیفیت و ظرفیت گردشگری با تأکید بر الگوهای رفتاری گردشگران در مشهد
-
رفتارشناسی پیامبر اکرم (ص) در تعاملات اجتماعی با یهودیان مدینه
-
مطالعه تطبیقی نظریه تقلید در باب هنر از دیدگاه فلسفه غرب و فلاسفه ایرانی اسلامی
-
experimental assessment of porous material anisotropy and its effect on gas permeability
-
incorporating of two waste materials for the use in fine-grained soil stabilization
سوال خود را در مورد این مقاله مطرح نمایید :