-
inter-laboratory variability in in vitro spinal segment flexibility testing
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/06/01
- تاریخ انتشار در تی پی بین: 1390/06/01
- تعداد بازدید: 371
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
in vitro spine flexibility testing has been performed using a variety of laboratory-specific loading apparatuses and conditions, making test results across laboratories difficult to compare. the application of pure moments has been well established for spine flexibility testing, but to our knowledge there have been no attempts to quantify differences in range of motion (rom) resulting from laboratory-specific loading apparatuses. seven fresh-frozen lumbar cadaveric motion segments were tested intact at four independent laboratories. unconstrained pure moments of 7.5 nm were applied in each anatomic plane without an axial preload. at laboratories a and b, pure moments were applied using hydraulically actuated spinal loading fixtures with either a passive (a) or controlled (b) xy table. at laboratories c and d, pure moments were applied using a sliding (c) or fixed ring (d) cable–pulley system with a servohydraulic test frame. three sinusoidal load-unload cycles were applied at laboratories a and b while a single quasistatic cycle was applied in 1.5 nm increments at laboratories c and d. non-contact motion measurement systems were used to quantify rom. in all test directions, the rom variability among donors was greater than single-donor rom variability among laboratories. the maximum difference in average rom between any two laboratories was 1.5° in flexion-extension, 1.3° in lateral bending and 1.1° in axial torsion. this was the first study to quantify rom in a single group of spinal motion segments at four independent laboratories with varying pure moment systems. these data support our hypothesis that given a well-described test method, independent laboratories can produce similar biomechanical outcomes.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
مدلسازی تاثیر عوامل محیطی و ترافیکی بر شدت تصادفات در جاده های برون شهری
-
بررسی شاخص های مدیران شایسته در پروژه های عمرانی؛ مطالعه موردی: شرکت آریانفت شهاب
-
روان شناسی مثبت گرا (مبانی و فنون کاربردی روان درمانی مثبت گرا)
-
بررسی نشست آینده در شهر کرمان با استفاده از مدل modflow
-
بررسی اثرات بازدارندگی لاکتوباسیلوس بر علیه هلیکوباکترپیلوری در شرایط گرادیان گلوکز و اکسیژن در سیستم ژلی تثبیت شده
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
مؤلفه های نظام سازی حقوقی در منظومه فکری استاد جعفری لنگرودی
-
تاثیر استانداردسازی و سفارش سازی بر کیفیت خدمات و وفاداری مشتریان با تعدیل گری رضایتمندی مشتری (مورد مطالعه: واحد بهره برداری ذخایر گازی پالایشگاه چهارم پارس جنوبی)
-
تحلیل هویت اجتماعی مانلی نیما براساس تحلیل انتقادی گفتمان
-
an analysis of the shear strength and rupture modulus of polyolefin-fiber reinforced concrete at different temperatures
-
modeling of dowel jointed rigid airfield pavement under thermal gradients and dynamic loads
سوال خود را در مورد این مقاله مطرح نمایید :