• effective flexural stiffness of slender reinforced concrete columns under axial forces and biaxial bending

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 958
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     most of the design codes (aci-318-2008 and euro code–2-2004) propose the moment magnifier method in order to take into account the second order effect to design slender reinforced concrete columns. the accuracy of this method depends on the effective flexural stiffness of the column. this paper proposes a new equation to obtain the effective stiffness ei of slender reinforced concrete columns. the expression is valid for any shape of cross-section, subjected to combined axial loads and biaxial bending, both for short-time and sustained loads, normal and high strength concretes, but it is only suitable for columns with equal effective buckling lengths in the two principal bending planes. the new equation extends the proposed ei equation in the “biaxial bending moment magnifier method” by bonet et al. (2004) [6], which is valid only for rectangular sections. the method was compared with 613 experimental tests from the literature and a good degree of accuracy was obtained. it was also compared with the design codes aci-318 (08) and ec-2 (2004) improving the precision. the method is capable to verify and design with sufficient accuracy slender reinforced concrete columns in practical engineering design applications.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها