-
simple methodology to create master curves for stiffness of asphalt mixtures
جزئیات بیشتر مقاله- تاریخ ارائه: 1392/07/24
- تاریخ انتشار در تی پی بین: 1392/07/24
- تعداد بازدید: 1079
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
in road engineering, most of the mechanistic design methodologies for asphalt pavements are based on estimating the structural response of the pavement, i.e. the critical stresses/strains due to a certain design load. the critical strains, which are generally considered, are the horizontal flexural tensile strain at the bottom of the asphalt layer and the vertical compressive strain at the top of the subgrade. for the calculation of the stresses/strains, use is made of linear elastic multi-layer program like bisar orviscoelastic multi-layer programs e.g. kenlayer and veroad. typically the stiffness modulus of asphalt concrete increases with decreasing temperature and increasing loading frequency. by shifting the stiffness modulus versus loading time relationship for various temperatures horizontally with respect to the curve chosen as reference, a complete modulus-time behavior curve at a constant, arbitrary chosen, reference temperature tref can be assembled. this paper describes a methodology to construct the stiffness master curves for asphalt mixture. the model described is based on physical observations and it is believed to give ‘reasonable’ estimates for the mix stiffness at any arbitrary loading frequency. the technique of the determination of the master curve is based on the principle of time-temperature correspondence, or thermo-rheological simplicity. the experimental (stiffness) data are plotted versus log frequency or log loading time and by choosing a reference temperature the data of the other temperatures are shifted horizontally until they fit the curve for the reference temperature. then the data obtained at the other temperatures are shifted until they fix the extended reference curve. master curve can be constructed by fitting a sigmoid function using non-linear least square regression techniques. the shifting will be done using an experimental approach by solving shift factors simultaneously with the parameters of the model without the need to assume any functional form for the shift factor equation. based on the material presented in this paper, has been founded that a sigmoid model can best describe the master curve of mix stiffness of asphalt concrete. this model also can explain the physical behavior of asphalt concrete.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی اعتیاد زن امروز و تأثیر مخرب آن بر ساختار خانواده
-
کاربرد کنترل پروژه درصنعت ساخت و ساز ایران
-
میکروکپسوله سازی اسانس پرتقال به روش تشکیل توده بهم پیوسته پیچیده و نحوه آزادسازی آن
-
رتبه بندی موانع پیش روی راه اندازی کسب و کارهای کشاورزی ارگانیک در ایران
-
convex set theory-based seismic hazard analysis of low seismicity area
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
تاثیر مازاد بدهی بر ریسک پذیری
-
بررسی تاثیر فناوری اطلاعات بر مدیریت بازاریابی و عملکرد فروشگاه های زنجیره ای شهروند
-
تاثیر اندوه مقایسه بر سایش اجتماعی با میانجی گری حسادت خاموش
-
evaluation of progressive collapse in steel structures designed based on iranian code of practice for seismic resistant design buildings (standard no. 2800), 4th edition and iranian national building code (inbc), part 10
-
study on the compaction effect factors of lime-treated loess highway embankments
سوال خود را در مورد این مقاله مطرح نمایید :