محبوبترین نویسندگان :
نویسندگان مقالات پربازدید :
نخستین همایش آسیایی و نهمین همایش ملی تونل
جزئیات رویداد
همایش ، رویداد ، ژورنال
اینستاگرام تی پی بین
حوزه های تحت پوشش رویداد

  • (improvement of tunnel waterproofing performance by execution of watertight temporary support (wts

    نویسندگان :
    کلمات کلیدی :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 809
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     according to investigations conducted on the existing underground tunnels, one of the most primary problems observed in these infrastructures is water leakage due to the penetration of water through damaged waterproofing system and final lining. while the water infiltrate through the soil, there is a high probability that corrosive materials such as acids and sulfates may dissolve in the water. as a result, waterproofing membrane starts corrosion after contact with corrosive water and tunnel will experience irreparable structural damages such as steel reinforcement corrosion and concrete cracks. hence, the major problem in all existing underground tunnels is the direct contact between high volumes of aggressive water with the main waterproofing membrane without any defense opportunity. execution of a watertight temporary support (wts) right after each partial excavation can be a proper solution to this problem. the objective of this paper is to demonstrate the positive roll of wts in improvement of tunnel waterproofing performance. in this study the standard test method astm c 642 has been carried out to estimate the porosity and pore volume in concrete specimens. furthermore, a cement based polymer was added to test mortar mixture to reduce the porosity and permeability of hardened specimens. according to the final results, percentage of volume of permeable pore space or porosity (ɸ) less than 11% was achieved for mortar specimens which were contained 7.5% to 20% acrylic polymer modifier (apm) while the porosity of reference specimen was 14.42%. additionally, the best result was obtained for the test mortar specimen which was contained 12.5% apm, with 9.78 % porosity.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها