• development of a peltier current lead for the 200-m-class superconducting direct current transmission and distribution system

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 812
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     reducing cryogenic heat leaks is critical for superconducting applications. reduction of heat leak at the terminals is essential for uses with short-length applications, where cryogenic losses at the terminals dominate. we are developing a 200-m-class superconducting direct current (dc) transmission and distribution system (caser-2), and have used a peltier current lead (pcl) for heat insulation at the terminals. the pcl consists of thermoelectric elements and copper leads, which enhance the performance of superconducting systems. as dc flows through the current lead, thermoelectric elements on opposite terminations of a superconducting line can be used to decrease the heat ingress to the cryogenic environment (n-type on one end, p-type on the opposite end). during the current feeding and cooling test, a large temperature difference was observed across thermoelectric elements in the pcl. this demonstrates that we have successfully insulated the heat leak at the current lead. during the fourth cooling test, we established a new pcl design with p-type elements at terminal b, and then compared the performance of the terminals. several improvements were implemented, including balancing the resistances of the pcl to enhance the stability of the superconducting systems.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین ژورنال ها