محبوبترین نویسندگان :
نویسندگان مقالات پربازدید :
مجله بین المللی مخازن تحت فشار و لوله کشی
جزئیات رویداد
اینستاگرام تی پی بین
همایش ، رویداد ، ژورنال
حوزه های تحت پوشش رویداد

  • application of stress relaxation testing in evaluation of creep strength of a tungsten-alloyed 10% cr cast steel

    نویسندگان :
    کلمات کلیدی :
    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 839
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     uniaxial isothermal stress relaxation tests (srt) were performed on a tungsten-alloyed 10% cr cast steel (g-x12cr mo w v nb n 10 1 1) at temperatures of 580, 600 and 620 °c and initial strain levels of 0.2, 0.5 and 0.8%. inelastic strain rates for different stresses were estimated from the stress versus time data generated from the tests. conventional creep tests were also conducted on the same material at 580, 600 and 620 °c and at different stress levels. the strain rate data estimated from srt were compared with minimum creep rates derived from the creep tests; the strain rates estimated from srt with 0.8% initial strain level are in better agreement than those estimated from srt with 0.2 and 0.5% initial strain levels. in order to ascertain the technique, stress relaxation behaviour was estimated from creep test data and compared with the stress relaxation curves obtained from srt at corresponding temperatures. the stress relaxation curves obtained from srt with 0.8% initial strain level are in good agreement with the stress relaxation curves estimated from the creep tests. it is concluded that the stress relaxation test with initial strain level of 0.8% could be considered as an appropriate short-term test technique for estimation of creep strength of newly developed materials.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها