• effect of rare earth element yttrium addition on microstructures and properties of a 21cr–11ni austenitic heat-resistant stainless steel

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 382
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     in this comparative study, the microstructure and the mechanical properties of a 21cr–11ni austenitic heat-resistant stainless steel with and without addition of rare earth (re) element yttrium have been investigated. the results show that a number of fine spherical yttrium-rich oxide particles are not uniformly distributed in the matrix of steel with yttrium; instead, they are aligned along the rolling direction. the grains surrounding the alignment are nearly one order of magnitude smaller than those farther away from the alignment. the approximate calculation results indirectly show that the grain refinement may be mainly attributed to the stimulation for nucleation of recrystallization rather than to pinning by particles. furthermore, the alignment has resulted in significant loss in transverse impact toughness and tensile elongation at room temperature. there is a trough in the hot ductility–temperature curve, which is located between 973 and 1173 k. the ductility trough of steel with yttrium becomes shallow within a certain temperature range, especially around 1073 k, indicating that improvement on hot ductility is achieved by yttrium addition. the results may be attributed to the increase of grain boundary cohesion indicated by the effective improvement on intergranular failure tendency, and the inhibitory effect of yttrium on sulfur segregation to grain boundaries is believed to be an important cause.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها