• surface durability and design criteria for graphite–bronze sintered composites in dry sliding applications

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 548
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
    sintered bronze with the addition of graphite as self lubricant is widely used in sliding bearings and bushes applications, especially where grease and oil lubricant cannot be considered. aim of this work is to study the dry sliding wear behavior of a porous sintered bronze–graphite composite, which is characterized by a transition from solid lubrication to adhesive wear. in this last condition graphite loses its efficiency as solid lubricant due to the frictional heat. the efficiency of the solid lubrication was examined at different loads and sliding velocities; it decreases on increasing both load and velocity. the behavior in the different dry sliding conditions was investigated and the corresponding flash temperature was calculated. results indicate that transition occurs when the flash temperature reaches at least 360 k. some design guidelines were then proposed, based on a p0 vs. v map, which defines the parameters ensuring both that no plastic deformation occurs and that solid lubrication is efficient during dry sliding. the relative design scheme gives a tool to verify if the dimensional and geometrical characteristics of the part are guaranteed during its expected life.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها