a method for measuring the inertia properties of rigid bodies

a method for the measurement of the inertia properties of rigid bodies is presented. given a rigid body and its mass, the method allows to measure (identify) the centre of gravity location and the inertia tensor during a single test. the proposed technique is based on the analysis of the free motion of a multi-cable pendulum to which the body under consideration is connected. the motion of the pendulum and the forces acting on the system are recorded and the inertia properties are identified by means of a proper mathematical procedure based on a least square estimation. after the body is positioned on the test rig, the full identification procedure takes less than 10 min. the natural frequencies of the pendulum and the accelerations involved are quite low, making this method suitable for many practical applications. in this paper, the proposed method is described and two test rigs are presented: the first is developed for bodies up to 3500 kg and the second for bodies up to 400 kg. a validation of the measurement method is performed with satisfactory results. the test rig holds a third part quality certificate according to an iso 9001 standard and could be scaled up to measure the inertia properties of huge bodies, such as trucks, airplanes or even ships.