• linkages between microstructure and mechanical properties of ultrafine interconnects

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1392/07/24
    • تاریخ انتشار در تی پی بین: 1392/07/24
    • تعداد بازدید: 856
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     microstructures within ultrafine electronic interconnections, which change rapidly during the formation of such joints and evolve continuously thereafter under service conditions, are an important factor to be considered in order to accurately evaluate the reliability of electronic packages that contain such interconnects. by combining phase-field and finite-element mechanical modeling techniques, this work explicitly considers both the size and geometry of the joints to understand their effects on microstructural evolution and subsequent mechanical properties. the simulation results indicate that the degree of inhomogeneity of the stress distribution increases as the size of the joints is reduced when microstructure is considered. the calculated maximum stresses present in hourglass-shaped joints when considering microstructure are approximately 10 mpa larger than those present in the corresponding joints when neglecting microstructure. the geometries of such interconnects also have a significant effect on their mechanical properties. hourglass-shaped joints exhibit the lowest maximum von mises stresses in comparison with the other shapes considered. in addition, the included microstructural features can introduce local stress concentrations within the microjoints, which may deteriorate the reliability and performance of the electronic packages. it is therefore recommended that the microstructure as well as the size and geometry of joints be considered among the design and fabrication parameters to enable reliable ultrafine interconnects.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین ژورنال ها