• creep fracture behavior of dissimilar weld joints between t92 martensitic and hr3c austenitic steels

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 685
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     the creep fracture of t92/hr3c dissimilar weld joints is investigated. hr3c austenitic steel is welded with t92 martensitic steel to obtain a t92/hr3c weld joint. after welding, creep tests are carried out at 625 °c in the stress range 110–180 mpa. the results indicate that the creep fracture mechanism is dependent on stress. when stresses ≥140 mpa, the fracture location is at the t92 base material and the connection of adjacent dimples results in transcrystalline fracture. for stresses <140 mpa, the fracture location is at the t92 coarse-grained heat affected zone and growth of m23c6 particles as well as laves phase (fe2(w, mo)) precipitation on the grain boundaries leads to intergranular fracture.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم
مقالات جدیدترین رویدادها
مقالات جدیدترین ژورنال ها