-
a new approach to joining of bulk copper using microwave energy
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/01/01
- تاریخ انتشار در تی پی بین: 1390/01/01
- تعداد بازدید: 425
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
metallurgical joining of high thermal conductivity materials like copper has been technically challenging. this paper illustrates a novel method for joining of bulk metallic materials through microwave heating. joining of copper in bulk form has been carried out using microwave energy in a multimode applicator at 2.45 ghz and 900 w. charcoal was used as susceptor material to facilitate microwave hybrid heating (mhh). copper in coin and plate forms have been successfully joined through microwave heating within 900 s of exposure time. a sandwich layer of copper powder with approximately 0.5 mm thickness was introduced between the two candidate surfaces. near complete melting of the powder particles in the sandwich layer does take place during the microwave exposure leading to metallurgical bonding of the bulk surfaces. characterisation of the joints has been carried out through microstructure study, elemental analysis, phase analysis, microhardness survey, porosity measurement and tensile strength testing. x-ray diffraction (xrd) pattern indicates that some copper powder particles got transformed into copper oxides. xrd analysis also reveals that the dominant orientation (3 1 1) in starting copper powder got transformed into a preferential orientation (1 1 1) in the joint. a dense uniform microstructure with good metallurgical bonds between the sandwich layer and the interface was obtained. the hardness of the joint area was observed to be 78 ± 7 hv, while the porosity in the joint was observed to be 1.92%. strength character of the copper joints shows approximately 29.21% elongation with an average ultimate tensile strength of 164.4 mpa.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
مقایسه تاثیر انواع الیاف بر مشخصات بتن
-
تحلیل دینامیکی پل های مورب با سخت کننده های طولی تحت بارهای متحرک به روش نوار محدود به منظور تعیین ضرایب تقویت دینامیکی
-
گزارش 1 مورد شوانوما با تظاهر توده زبانی
-
blind bolted moment connection to unfilled hollow section columns using extended t-stub with back face support
-
effects of y2o3 nanoparticles on growth behaviors of cu6sn5 grains in soldering reaction
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
محدودیت فروش کوتاه مدت و خطر سقوط قیمت سهام با تاکید بر کارایی سرمایه گذاری
-
طراحی الگوی فرایند دانش آفرینی در دانشگاه بر اساس رویکرد آمیخته
-
بررسی اثر اقتصاد سیاسی پشت سر استقلال بانک مرکزی
-
خسارت ناشی از تأخیر در تحویل کالا و خسارات معنوی و اقتصادی در خصوص حمل و نقل دریایی
-
ارتباط بین استقرار مدیریت دانش و توانمندسازی با عملکرد شغلی کارکنان
سوال خود را در مورد این مقاله مطرح نمایید :