-
on the effect of lüders bands on the bending of steel tubes. part i: experiments
جزئیات بیشتر مقاله- تاریخ ارائه: 1392/01/01
- تاریخ انتشار در تی پی بین: 1392/01/01
- تعداد بازدید: 837
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
in several practical applications hot-finished steel pipe that exhibits lüders bands is bent to strains of 2–3%. lüders banding is a material instability that leads to inhomogeneous plastic deformation in the range of 1–4%. this work investigates the influence of lüders banding on the inelastic response and stability of tubes under rotation controlled pure bending. part i presents the results of an experimental study involving tubes of several diameter-to-thickness ratios in the range of 33.2–14.7 and lüders strains of 1.8–2.7%. in all cases the initial elastic regime terminates at a local moment maximum and the local nucleation of narrow angled lüders bands of higher strain on the tension and compression sides of the tube. as the rotation continues the bands multiply and spread axially causing the affected zone to bend to a higher curvature while the rest of the tube is still at the curvature corresponding to the initial moment maximum. with further rotation of the ends the higher curvature zone(s) gradually spreads while the moment remains essentially unchanged. for relatively low d/t tubes and/or short lüders strains, the whole tube eventually is deformed to the higher curvature entering the usual hardening regime. subsequently it continues to deform uniformly until the usual limit moment instability is reached. for high d/t tubes and/or materials with longer lüders strains, the propagation of the larger curvature is interrupted by collapse when a critical length is lüders deformed leaving behind part of the structure essentially undeformed. the higher the d/t and/or the longer the lüders strain is, the shorter the critical length. part ii presents a numerical modeling framework for simulating this behavior.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
نگاه اجمالى به سیماى زن در اساطیر ایرانى
-
ارزیابی عملکرد و بررسی مقاوم سازی سازه های بتنی مطالعه موردی: انبار دخانیات گیلان
-
بهینه سازی پارامتر های هندسی تیر های عریض قاب های خمشی بتن مسلح ناشی از تئوری منحنی های شکست
-
بررسی تأثیر عیار سیمان بر رئولوژی و خواص مکانیکی بتن خود تراکم حاوی میکروسیلیس
-
بهینه سازی فازی برنامه زمان بندی سیستم گرمایشی ساختمان
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
ارزیابی تاثیر نااطمینانی سیاسی بر بازده غیرطبیعی سهام در ایران؛ پژوهش موردی شرکت های منتخب عضو بورس اوراق بهادار تهران
-
بررسی رابطه بین گردش شغلی در صندوق بیمه اجتماعی کشاورزان، روستاییان و عشایر با توانمندسازی
-
کاربرد راهکارهای برتر در بازمهندسی فرایند نظام پیشنهادها در شرکت بهره برداری متروی تهران
-
قرارداد گروهی به عنوان یکی از استثنائات اصل نسبی بودن قراردادها
-
design and optimization of mechanical properties of reduced-graphene oxide- loaded cement
سوال خود را در مورد این مقاله مطرح نمایید :