-
the effect of pore geometry on the in vitro biological behavior of human periosteum-derived cells seeded on selective laser-melted ti6al4v bone scaffolds
جزئیات بیشتر مقاله- تاریخ ارائه: 1392/01/01
- تاریخ انتشار در تی پی بین: 1392/01/01
- تعداد بازدید: 788
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
the specific aim of this study was to gain insight into the influence of scaffold pore size, pore shape and permeability on the in vitro proliferation and differentiation of three-dimensional (3-d) human periosteum-derived cell (hpdc) cultures. selective laser melting (slm) was used to produce six distinct designed geometries of ti6al4v scaffolds in three different pore shapes (triangular, hexagonal and rectangular) and two different pore sizes (500 μm and 1000 μm). all scaffolds were characterized by means of two-dimensional optical microscopy, 3-d microfocus x-ray computed tomography (micro-ct) image analysis, mechanical compression testing and computational fluid dynamical analysis. the results showed that slm was capable of producing ti6al4v scaffolds with a broad range of morphological and mechanical properties. the in vitro study showed that scaffolds with a lower permeability gave rise to a significantly higher number of cells attached to the scaffolds after seeding. qualitative analysis by means of live/dead staining and scanning electron micrography showed a circular cell growth pattern which was independent of the pore size and shape. this resulted in pore occlusion which was found to be the highest on scaffolds with 500 μm hexagonal pores. interestingly, pore size but not pore shape was found to significantly influence the growth of hpdc on the scaffolds, whereas the differentiation of hpdc was dependent on both pore shape and pore size. the results showed that, for slm-produced ti6al4v scaffolds with specific morphological and mechanical properties, a functional graded scaffold will contribute to enhanced cell seeding and at the same time can maintain nutrient transport throughout the whole scaffold during in vitro culturing by avoiding pore occlusion.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
بررسی ویژگی های فرهنگی هنری فلزکاری، در اوایل دوره اسلامی ایران
-
بررسی تأثیر خواص پتروگرافی بر مقاومت تراکمی نامحصور و رفتار تنش- کرنش شیل های سازند شمشک
-
تاثیر تزریق درون هیپوکمپی dpn (آگونیست اختصاصی گیرنده ی بتا استرادیول) بر حافظه و یادگیری اجتنابی غیرفعال در موش صحرایی
-
membrane-assisted extractive butanol fermentation by clostridium saccharoperbutylacetonicum n1-4 with 1-dodecanol as the extractant
-
artificial agents and the expanding ethical circle
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
مروری بر استانداردهای بین المللی حسابداری ابزارهای مشتقه و چالش های پیاده سازی آن
-
مطالعه تأثیر عدم تقارن اطلاعاتی بر رابطه بین همزمانی قیمت و نقدشوندگی سهام
-
تحلیل جزایی رابطه مجازات تکمیلی با انواع تعزیرات
-
بررسی وضعیت سلامت معنوی در کارکنان یکی از دانشگاه های علوم پزشکی شهر تهران
-
compressive strength prediction of self-compacting concrete incorporating silica fume using artificial intelligence methods
سوال خود را در مورد این مقاله مطرح نمایید :