-
behavior of reinforced reactive powder concrete two-way slabs under static and repeated load
جزئیات بیشتر مقاله- تاریخ ارائه: 1400/08/01
- تاریخ انتشار در تی پی بین: 1400/08/01
- تعداد بازدید: 522
- تعداد پرسش و پاسخ ها: 0
- شماره تماس ژورنال: 982188779475ext.258
this paper studies the behavior of reinforced reactive powder concrete (rpc) two-way slabs under static and repeated load. the experimental program included testing six simply supported rpc two-way slabs of 1000 mm length, 1000 mm width, and 70 mm thickness. all the tested specimens were identical in their material properties, and reinforcement details except their steel fibers content. they were cast in three pairs, each one had a different steel fibers ratio (0.5 %, 1 %, and 1.5 %) respectively. in each pair, one specimen was tested under static load and the other under five cycles of repeated load (loading-unloading). static test results revealed that increasing steel fibres volume fraction from 0.5 % to 1 % and from 1% to 1.5%, led to an increase in the: first crack load by (32.2 % and 52.3 %), ultimate load by (36.1 % and 17.0 %), ultimate deflection by (33.6 % and 3.4 %), absorbed energy by (128 % and 20.2 %), and the ultimate strain by (1.1 % and 6.73 %). it also increased the stiffness and the ductility of the specimens especially at the final stages of loading. additionally, it delayed the propagation of the cracks, controlled their growth, kept the integrity of the specimens at post cracking stage, and avoided their ruin at the failure stage through its “bridging” effect. for the repeated load test, applying five cycles of repeated load to the steel fiber reinforced rpc two-way slab specimens led to a decreasing in the ultimate load capacity, ultimate deflection, ultimate strain, and absorbed energy in a comparison with the corresponding static test specimens, and that because of the loading-unloading process which causes a fluctuation of stresses and more damages in concrete. increasing the steel fibers volume fractions decreased the dissipated energy of the specimens that subjected to a repeated load, where the difference percent of dissipated energy between the first and second cycles of (r0.5 %, r1 %, and r1.5 %) specimens were (68.0 %, 46.2%, and 32.4%) respectively.
حوزه های تحت پوشش ژورنال
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
مطالعه عددی اثر پارامترهای طراحی در رفتار دیوار دیافراگمی مهار شده
-
مروری بر عوامل موثر بر طراحی داربست های مهندسی بافت غضروف: مشکلات و استراتژی ها
-
ارزیابی چابکی زنجیره تأمین با رویکرد anp در صنایع خودروسازی استان تهران
-
جلوه ی «عشق» در رباعیات خواجه ابوالوفا خوارزمی
-
مقایسه پیش نیازهای اجرای haccp در بخش تغذیه دو مرکز بهداشتی- درمانی نظامی و غیرنظامی
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
مدل سازی معادلات ساختاری رابطه طرح واره های ناسازگار اولیه با اضطراب اجتماعی با نقش میانجی هوش هیجانی
-
شناسایی اولویت بندی موانع پیاده سازی کنترل داخلی موفق در شرکت های شهرک صنعتی استان فارس
-
اثربخشی تئوری انتخاب بر وسواس فکری - عملی و نشخوار ذهنی در دوره بیماری کرونا ویروس در زنان خانه دار شهر همدان
-
اصول طراحانه معماری بیوفیلیک در بیمارستان تخصصی قلب و عروق از منظر کیفیت سلامت بیماران
-
optimization of urban street lighting conditions focusing on energy saving, safety and users’ needs
سوال خود را در مورد این مقاله مطرح نمایید :