• processing map for hot working characteristics of a wrought 2205 duplex stainless steel

    جزئیات بیشتر مقاله
    • تاریخ ارائه: 1390/01/01
    • تاریخ انتشار در تی پی بین: 1390/01/01
    • تعداد بازدید: 508
    • تعداد پرسش و پاسخ ها: 0
    • شماره تماس دبیرخانه رویداد: -
     processing map on a wrought 2205 duplex stainless steel under hot compression conditions has been developed based on the dynamic material model theories in the range 1223–1473 k and 0.01–10 s−1. the various domains in the map corresponding to different deformation characteristics have been discussed in combination of microstructural observations. the results show that the power dissipation efficiency (η) depends strongly on the dynamic recrystallization (drx) of austenite which plays a dominant role in microstructural evolution, while the ferrite phase mainly continues to exhibit relatively well-developed dynamic recovery (drv) at large strain. the optimum hot working domain of wrought 2205 duplex stainless steel is obtained to be in the temperature range 1373–1473 k and at strain rate of 0.01 s−1, with peak efficiency 50% occurring at about 1423 k, in which more uniform microstructure is developed due to the occurrence of complete drx of austenite. the unstable hot working regimes are predicted by prasad instability criterion, in good agreement with the macro-and microstructural observations. as predicted, flow instability, which are manifested as twinning, bands of flow localization and the absence of drx in austenite are observed at lower temperatures and higher strain rates (1223–1273 k and 1–10 s−1); in other cases, wedge cracking is responsible for instability phenomena observed at the temperature range 1373–1423 k and strain rate of 10 s−1.

سوال خود را در مورد این مقاله مطرح نمایید :

با انتخاب دکمه ثبت پرسش، موافقت خود را با قوانین انتشار محتوا در وبسایت تی پی بین اعلام می کنم