impact of a synthetic leachate on permittivity of gcls measured by filter press and oedopermeameter tests

geosynthetic clay liners (gcls) are used in landfill liner applications due primarily to their low hydraulic conductivity to water. the low hydraulic conductivity of gcls comes from the structure of the clay in the bentonite. however, the interaction between clay and aggressive liquids may alter the structure of the clay and, thus, result in an increase in the hydraulic conductivity of the gcl. this paper presents the results of a project aimed at evaluating the impact of a synthetic leachate on the structure of four different bentonites used in the manufacturing of gcls. the preparation of bentonite dispersions increased the interaction between the bentonites and the various liquids. the hydraulic properties of the dispersions also were tested using filter press tests to obtain flow curves. results of these tests were correlated with the cationic concentration, electrical conductivity and ph of the dispersions, swell indexes of the bentonite extracted from the gcls, and permittivities of the intact gcls determined in oedopermeameter tests. the results showed that one bentonite was more sensitive to the synthetic leachate than the other bentonites. for example, the permittivities of the more sensitive bentonite based on the oedopermeameter tests and filter press tests were respectively 2.11 × 10⁻⁸ s⁻¹ and 5.6 × 10⁻⁸ s⁻¹, whereas the permittivities for other bentonites, including a natural sodium bentonite and two sodium-activated calcium bentonites, were respectively 5.7 to 6.5 × 10⁻⁹ s⁻¹ and 3.2 to 3.5 × 10⁻⁸ s⁻¹. the filter press test served as a quick and easy-to-use test to compare the performance of the various bentonites in containing a given liquid. however, the oedopermeameter test or direct permeation test is preferable to filter press tests or fluid loss tests for evaluating the long-term impact of a liquid on a bentonite.