-
a new approach for failure criterion for sheet metals
جزئیات بیشتر مقاله- تاریخ ارائه: 1390/01/01
- تاریخ انتشار در تی پی بین: 1390/01/01
- تعداد بازدید: 838
- تعداد پرسش و پاسخ ها: 0
- شماره تماس دبیرخانه رویداد: -
the interpretation of sheet forming simulations relies on failure criteria to define the limits of metal deformation. the common requirements for these criteria across a broad range of application areas have not yet been satisfied or fully identified, and a single criterion to satisfy all needs has not been developed. areas where existing criteria appear to be lacking are in the comprehension of the effects of non-proportional loading, general non-planar and triaxial stress loading, and process and material mechanisms that differentiate between necking and fracture. this study was mainly motivated to provide an efficient method for the analysis of necking and fracture limits for sheet metals. in this paper, a model for the necking limit is combined with a model for the fracture limit in the principal stress space by employing a stress-based forming limit curve (flc) and the maximum shear stress (mss) criterion. a new metal failure criterion for in-plane isotropic metals is described, based on and validated by a set of critical experiments. this criterion also takes into consideration of the stress distribution through the thickness of the sheet metal to identify the mode of failure, including localized necking prior to fracture, surface cracking, and through-thickness fracture, with or without a preceding neck. the fracture model is also applied to the openability of a food can for aa 5182. the predicted results show very good agreement with the experimentally observed data.
مقالات جدیدترین رویدادها
-
استفاده از تحلیل اهمیت-عملکرد در ارائه الگوی مدیریت خلاقیت سازمانی و ارائه راهکار جهت بهبود
-
بررسی تاثیر ارزش وجوه نقد مازاد بر ساختار سرمایه شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر سطح افشای ریسک بر قرارداد بدهی شرکت های پذیرفته شده در بورس اوراق بهادار تهران
-
بررسی تأثیر رتبه بندی اعتباری مبتنی بر مدل امتیاز بازار نوظهور بر نقد شوندگی سهام با تأکید بر خصوصی سازی شرکت ها
-
تأثیر آمیخته بازاریابی پوشاک ایرانی بر تصویر ذهنی مشتری پوشاک ایرانی (هاکوپیان)
-
ساخت و مشخصه یابی نانوپودر و بالک نانوساختار کامپوزیتی زیر کونیا- هیدروکسی آپاتیت برای کاربردهای پزشکی
-
بررسی تاثیر رویکرد آب درمانی در طراحی فضاهایی تفریحی
-
پردازش داده های سنجنده آستر به روش نقشه برداری زاویه طیفی و تلفیق آن با اطلاعات زمین شناسی و ژئوشیمی رسوبات رودخانه ای برای پتانسیل یابی مناطق مستعد کانی سازی، شمال شرقی بیرجند
-
بررسی توان های محیطی و نقش آن در توسعه روستایی: مطالعه موردی شهرستان ارومیه
-
تأثیر معیارهای فرهنگی بر سعادت و شقاوت انسانها
مقالات جدیدترین ژورنال ها
-
مدیریت و بررسی افسردگی دانش آموزان دختر مقطع متوسطه دوم در دروان کرونا در شهرستان دزفول
-
مدیریت و بررسی خرد سیاسی در اندیشه ی فردوسی در ادب ایران
-
واکاوی و مدیریت توصیفی قلمدان(جاکلیدی)ضریح در موزه آستان قدس رضوی
-
بررسی تاثیر خلاقیت، دانش و انگیزه کارکنان بر پیشنهادات نوآورانه کارکنان ( مورد مطالعه: هتل های 3 و 4 ستاره استان کرمان)
-
بررسی تاثیر کیفیت سیستم های اطلاعاتی بر تصمیم گیری موفق در شرکتهای تولیدی استان اصفهان (مورد مطالعه: مدیران شرکتهای تولیدی استان اصفهان)
-
بررسی تاثیر مکان شمع، طول شمع و شرایط سرشمع بر تقویت و تثبیت شیروانی های خاکی غیرهمگن
-
مروری بر گیاه پالایی و مکانیسم های مربوطه
-
نقش کنکور آزمایشی در موفقیت دانش آموزان در کنکور سراسری
-
بررسی تأثیر تجارت آزاد بر صادرات محصولات کشاورزی (مطالعه موردی: گندم و پسته)
-
investigating the energy efficiency of tex high energy derivatives with different carbon fuller nano structures under different temperature conditions by dft method
سوال خود را در مورد این مقاله مطرح نمایید :